PP Rainwater Module 50T(Green)
PP plastic modules are injection-molded from polypropylene. By enveloping the structure with a composite geotechnical membrane, the system can function as either a storage reservoir.
PP Rainwater Module 50T(Green)
Model Number:XH-MK1000
Dimension:L*W*H=1000*500*500(mm)
Weight:9.2kg-10kg(1000*500*250 The weight of a single piece is
4.6kg-5.0kg)
The aforementioned weight excludes the side panels,which weight around
1.0kg
Compressive Strength:Vertical Compressive Strength 500kN/㎡,
Lateral Compressive Strength 150kN/㎡.
Porosity:95%
Support Column Wall Thickness:Small End 4.5mm,Large End 3.0mm
(Average Wall Thickness 3.75mm)
Related products
-
PP Rainwater Module 35T(Black)
Contact UsPP plastic modules are injection-molded from polypropylene. They can be interconnected to form an underground water storage tank.
-
Hazardous waste incineration device project
Contact UsThis project plans to build a treatment of 50,000 tons of organic substance solvents comprehensive recycling and utilization project hazardous waste incineration device, to incinerate the hazardous waste generated by the our factory and for receiving waste from other companies.
-
KSXH-20B Soldering Fume Extractor
Contact UsFeatures:
● light weight, easy to operate
● Adjustable flexible POM suction arm
● High-power DC brush-less motor
● Multi-level-filtration,cotton filter, HEPA filter and activated carbon filter
● Long service life, low noise, large air flow -
Hob
Contact UsIt is used Can-making/Metal sheet Painting and Printing Ovens. According to the specifications of the printed and coated products, a large number of C-shaped buckles and rollers (made of specialized food grade imported materials) are installed on the inner bracket and edge ears of the wicket, allowing the sheet (aluminum plate) to dry and run in a separate state from the wicket, effectively avoiding the problem of dot shaped scratches and burns in the printed and coated products.
Reviews
There are no reviews yet.