PP Rainwater Module 50T(Green)
PP plastic modules are injection-molded from polypropylene. By enveloping the structure with a composite geotechnical membrane, the system can function as either a storage reservoir.
PP Rainwater Module 50T(Green)
Model Number:XH-MK1000
Dimension:L*W*H=1000*500*500(mm)
Weight:9.2kg-10kg(1000*500*250 The weight of a single piece is
4.6kg-5.0kg)
The aforementioned weight excludes the side panels,which weight around
1.0kg
Compressive Strength:Vertical Compressive Strength 500kN/㎡,
Lateral Compressive Strength 150kN/㎡.
Porosity:95%
Support Column Wall Thickness:Small End 4.5mm,Large End 3.0mm
(Average Wall Thickness 3.75mm)
Related products
-
Gel sealed Mini-pleat HEPA filter（top gel seals）
Contact UsThe two-component gel is poured into the liquid seal type HEPA filter , and this is used as an installation seal.
-
Refinery dry gas tail gas hydrogen
Contact UsRefinery dry gas refers to various tail gases by-produced during the crude oil production process, including catalytic cracking dry gas, coking dry ga…
-
Waste liquid and waste gas incineration device
Contact UsThe furnace volume of the combined incinerator is based on the exhaust gas generated by incineration, the comprehensive residence time is ≥4s, the high-temperature (1100℃) incineration treatment is ≥1100℃, and the high-temperature section residence time is ≥2.5s to ensure the removal efficiency of organic matter.
-
Fluoride Removal Agent
Contact UsThe fluoride removal agent is a kind of silica-based modified ecological material specially applied to remove fluorine from natural water
Reviews
There are no reviews yet.