Hydraulic tilting Kneader
Mainly used in ink silicone rubber,plastic,pencils,heat-shrinkable material,paints,mosquito coils,carbon graphite,oil,gum base,various viscosity of CMC,modified starch,BMC ,SMC,etc.
https://www.globalkneader.com/Hydraulic-tilting-Kneader.html
Mainly used in ink siliconerubber,plastic,pencils,heat-shrinkable material,paints,mosquito coils,carbon graphite,oil,gum base,various viscosity of CMC,modified starch,BMC ,SMC,composite manhole cover,pharmaceuticals industry etc.Agitator and the part contact with material is made of stainless steel,which could corrosion-resistant and non-rust,also ensure the material chemical properties. Bearing support uses self-aligning bearing with the feature of no movement along shaft.
|
Type |
Volume/L |
Electrical power/kw |
Power/kw |
Steam/Mpa |
Speed/rpm |
|
NHF-5L |
5 |
0.75-1.5 |
0.15 |
0.3 |
N1=59,N2=35 |
|
NHF-40L |
40 |
2.2-5.5 |
3 |
0.3 |
N1=59,N2=35 |
|
NHF-100L |
100 |
4-11 |
4 |
0.3 |
N1=40,N2=21 |
|
NHF-300L |
300 |
11-22 |
8 |
0.3 |
N1=40,N2=21 |
|
NHF-500L |
500 |
15-30 |
16 |
0.3 |
N1=36,N2=21 |
|
NHF-1000L |
1000 |
18.5-55 |
24 |
0.3 |
N1=33,N2=22 |
|
NHF-1500L |
1500 |
22-55 |
36 |
0.3 |
N1=38,N2=21 |
|
NHF-2000L |
2000 |
37-75 |
48 |
0.3 |
N1=25,N2=17 |
|
NHF-3000L |
3000 |
45-90 |
60 |
0.3 |
N1=25,N2=18 |
|
NHF-4000L |
4000 |
55-110 |
66 |
0.3 |
N1=33,N2=20 |
|
NHF-5000L |
5000 |
90-132 |
0.3 |
N1=36,N2=21 |
Related products
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
-
MA-(2~8MM)×1800MM Steel Coil Slitting Line
Contact UsMA-(2~8MM)×1800MM Steel Coil Slitting Line is mainly composed by the following components : uncoiler, guiding device
-
OPTIMIZING CROSS CUT SAW MAXCUT F18S+SENSIT 005
Contact UsHigh speed optimization Timber cutting optimizing Cross-cut saw and precision cutting
Automation production line. -
Reviews
There are no reviews yet.