FR5 epoxy fiberglass laminate
FR-5 glass epoxy is similar to FR-4 but is designed for higher operating temperatures.
FR-5
INSULATION BOARD
≥ 340 MPa
Flexural strength
perpendicular to laminations
≥ 33 KJ/m²
Charpy impact
strength parallel to laminations
≥ 35 Kv
Electric strength perpendicular to
laminations(at 90℃ in 25# transformer oil)
≥ 5*(10²*10²) MΩ
Insulation resistance
after immersion in water
94-V0 Level
Combustibility
30 mg
Water absorption
155 ℃
TG
FR-5 glass epoxy is similar to FR-4 but is designed for higher operating
temperatures. It is able to keep its insulating and mechanical properties up to
an operating temperature of 150 degrees Centigrade (FR-5). It maintains its
properties in dry and humid conditions. Because of its better glass transition
temperature coupled with its flame-retardant nature, FR-5 glass epoxy is often
the preferred material for automobile producers.
Related products
-
-
BM210A
Contact UsThe BM210A is a high-performance Battery Management System (BMS) designed for lithium battery packs.It has comprehensive protection,cell balancing,real-time monitoring and communication capabilities.
-
Librids 200/400W Portable Solar Panel,Foldable Solar Panel Charger for Power Station, Outdoor Camping RV Travel,Compatible
Contact UsEnergyGain builds update revolutionary solar panels with breakthrough Aramid Fiber (most used in body armor) and housed in robust structure.
-
GF-AB02 Thermal Gel
Contact UsZS-GF-AB30 is a kind of appearance paste two-component molding high thermal conductivity silicone gel, can be heated curing, with the characteristics of the higher the temperature the faster the curing. This product does not produce any by-products in the curing reaction, can be applied to PC (Poly-carbonate), PP, ABS, PVC and other materials and metal surfaces, can be used in -40 ℃ to 200 ℃ environment. It can be used in the environment from -40℃ to 200℃. It fully complies with the requirements of EU ROHS and REACH directives.
Reviews
There are no reviews yet.