Hydraulic tilting Kneader
Mainly used in ink silicone rubber,plastic,pencils,heat-shrinkable material,paints,mosquito coils,carbon graphite,oil,gum base,various viscosity of CMC,modified starch,BMC ,SMC,etc.
https://www.globalkneader.com/Hydraulic-tilting-Kneader.html
Mainly used in ink siliconerubber,plastic,pencils,heat-shrinkable material,paints,mosquito coils,carbon graphite,oil,gum base,various viscosity of CMC,modified starch,BMC ,SMC,composite manhole cover,pharmaceuticals industry etc.Agitator and the part contact with material is made of stainless steel,which could corrosion-resistant and non-rust,also ensure the material chemical properties. Bearing support uses self-aligning bearing with the feature of no movement along shaft.
|
Type |
Volume/L |
Electrical power/kw |
Power/kw |
Steam/Mpa |
Speed/rpm |
|
NHF-5L |
5 |
0.75-1.5 |
0.15 |
0.3 |
N1=59,N2=35 |
|
NHF-40L |
40 |
2.2-5.5 |
3 |
0.3 |
N1=59,N2=35 |
|
NHF-100L |
100 |
4-11 |
4 |
0.3 |
N1=40,N2=21 |
|
NHF-300L |
300 |
11-22 |
8 |
0.3 |
N1=40,N2=21 |
|
NHF-500L |
500 |
15-30 |
16 |
0.3 |
N1=36,N2=21 |
|
NHF-1000L |
1000 |
18.5-55 |
24 |
0.3 |
N1=33,N2=22 |
|
NHF-1500L |
1500 |
22-55 |
36 |
0.3 |
N1=38,N2=21 |
|
NHF-2000L |
2000 |
37-75 |
48 |
0.3 |
N1=25,N2=17 |
|
NHF-3000L |
3000 |
45-90 |
60 |
0.3 |
N1=25,N2=18 |
|
NHF-4000L |
4000 |
55-110 |
66 |
0.3 |
N1=33,N2=20 |
|
NHF-5000L |
5000 |
90-132 |
0.3 |
N1=36,N2=21 |
Related products
-
UT 1.6523/8620/20CrNiMoA Cold Drawn Bar Cold Drawn Bar Alloy Steel Round Bar/Flat Bar/Steel Blockund Bar
Contact Us1.6523 Cold Drawn Bar Cold Drawn Bar Alloy Steel Round Bar/Flat Bar/Steel Block/Round Bar
-
Used NSC Schlumberger GC14 Gilling Machine
Contact UsYear: 1996
Spinning production line
Mixed strip: GC15 barrel diameter 1000 * 1200mm, 1 head and 1 barrel, automatic barrel change
One stitch: GC14 cylinder diameter 1000 * 1200mm, 1 head and 1 barrel, with self leveling and automatic barrel changing
Two needles: GC14 cylinder diameter 700 * 1200mm, two heads and two barrels, automatic barrel changing
Three needles: GC14 cylinder diameter 600 * 1200mm, 4 heads, 2 barrels, automatic barrel change
According to your requirements, we can transform it into a suitable size for your production needs! -
Waste plastic or Modified PE Pelletizing
Contact UsThe waste plastic or modified PE material is fed into the machine through a hopper. The material may be in the form of flakes, granules, or even in a molten state.
-
Optimizing Cross Cut Saw MAXCUT F18S+SENSIT 005
Contact UsHigh speed optimization Timber cutting optimizing Cross-cut saw and precision cutting
Automation production line.
Reviews
There are no reviews yet.