Gel sealed Mini-pleat HEPA filter（Peripheral gel seals）

The two-component gel is poured into the liquid seal type HEPA filter , and this is used as an installation seal.

The two-component gel is poured into the liquid seal type HEPA filter , and
this is used as an installation seal. This seal form has high reliability and is
suitable for PAO dust detection on site. Mainly used in the end of 0.3μm clean
room and purification equipment in the pharmaceutical industry to control
particles and microorganisms larger than 0.3μm in the clean room or equipment
work area. There are two types of HEPA filter, side sealing and top sealing.

Frame

Aluminum

Spacers

EVA

Filter media

Glass fiber

Gasket

Gel

Operation conditions

<80%/100%RH.40℃

Model

Specification(W×H×D)

Rated air volume(m3/h)

Initial resistance(Pa)

Weighting efficiency（PA）

Effectiveness@MPPS

CYWGB410.410-93H14

410×410×93

500

220

450

99.995%≤E<99.9995%

CYWGB550.550-93H14

550×550×93

1000

CYWGB650.650-93H14

650×650×93

1500

CYWGB750.750-93H14

750×750×93

2000

Reviews

There are no reviews yet.

Be the first to review “Gel sealed Mini-pleat HEPA filter（Peripheral gel seals）”

Your email address will not be published. Required fields are marked *

Category:

Related products

  • JS-04 Low Viscosity Polymer Filtration Reducer

    JS-04 is the polymer fluid loss additive of amphoteric and temperature and salt resistance using redox initiator system by AM, AA, AMPS, SA and DMDAAC with water as solvent. DF-03 can reduce the filtration loss, improve the mud cake quality, has good ability of high temperature resistance, salt and calcium contamination resistance. DF-03 has low viscosity to mud system due to narrow molecular weight scale. It is especially suitable for freshwater, saltwater, seawater drilling and completion fluids. The recommend dosage is 3.0 – 7.0ppb.

    Contact Us

  • Hazardous waste incineration device project

    This project plans to build a treatment of 50,000 tons of organic substance solvents comprehensive recycling and utilization project hazardous waste incineration device, to incinerate the hazardous waste generated by the our factory and for receiving waste from other companies.

    Contact Us

  • Metal sheet drying oven for can making

    The oven is mainly used to dry the coating on the tin (or aluminum) sheet in the can making process. The entire line mainly consists of conveying, feeding devices, drying, cooling, and material collection and stacking.

    Contact Us

  • 30 tons/day liquid waste +10 tons/day solid waste hazardous waste incineration device

    This project intends to build a 30 tons/day liquid waste +10 tons/day solid waste hazardous waste incineration device for Jining Wansheng Environmental Protection Materials Co., LTD., which is used for incineration and treatment of hazardous waste produced by the factory.

    Contact Us