Galvanized Wire Machine
Products: Low ,medium and high carbon galvanizing steel wire, Diameter range: 0.7~1.5mm, 0.9~2.5mm, 3.0~5.0mm As clients requirement Coating Zinc weight range: 5~15 g/m2 ,15~35g/m2
Electric galvanizing design scheme for Low carbon steel wire
I、Design basis:
1、Products: low carbon galvanized steel wire
2、Raw material: Example -SAE1006, Q195 wire
3、Wire diameter: φ0.8—3.0mm
4、Steel wire strength: 350–450Mpa
5、Galvanized layer weight: 10g/m2, tolerance ±1g/m2
6、DV value: 80
7、Line number: 24 lines
8、Wire spacing: 25mm Spacing; Max width Total 2500mm;
9、Height of steel wire from the ground (elevation of steel wire travel): 950mm
10、Wiring method: straight in type
11、Line length: approximately 90 meters
12、Workshop length: straight in type
13、Usage voltage: According to customer requirements, our standard voltage is 380V
14、Output (minimum): ＞ 16T/day (based on ø 1.2mm, 50m/min, 24 hours/day),
＞ 12T/day (based on ø 0.8mm, 90m/min, 24 hours/day)
According to the factory working efficiency: ＞75%
Note: This price is according to:
1.Uesd for: mesh wire, building wire, binding wire
2.Product Capacity: As machine normal design speed
3. Electric power resource: 440V, 50HZ.
|
Example galvanizing wire product capacity |
|||||
|
mm |
DV |
hours |
pcs |
efficiency |
Tons |
|
0.9 |
90 |
24 |
40 |
85~80% |
24.43~23 |
|
1.6 |
90 |
24 |
40 |
85~80% |
43.25~40.7 |
|
2 |
90 |
24 |
40 |
85~80% |
154.3~51 |
|
2.5 |
90 |
24 |
40 |
85~80% |
67.88~63.89 |
Process flow:
No.1. Pay-off bobbin→ Space 2.5 meters →No.2. Alkaline water washing (5m)→No. 3. Hydrochloric acid pickling (8.4m) →No.4. water washing (4m)→No.5. electro galvanizing (27m)→No.6. water washing (include hot water washing saponification 4m)→No.7. drying (4m)→Space 2.5 meters→No.8 wire collection take up machine
Acid mist purification tower:
To prevent acid gas leakage and environmental pollution caused by the accumulation of hydrogen gas in the pickling tank, a set of acid mist purification tower is equipped. The acid mist is absorbed and neutralized by the spray, and a small amount of hydrogen is discharged through the pipeline.
The take-up Machine: Horizontal coiler ,Block collecting wire
Adopts a 450mm horizontal take-up machine, with a take-up wire collecting in coiler rack ;The take-up machine is driven by a chain wheel, with 2-sets 11kw take-up motors equipped with frequency converters and reducers. Each single disc is equipped with a full disc and a manual clutch for automatic parking.
Related products
-
Used NSC Schlumberger GC14 Gilling Machine
Contact UsYear: 1996
Spinning production line
Mixed strip: GC15 barrel diameter 1000 * 1200mm, 1 head and 1 barrel, automatic barrel change
One stitch: GC14 cylinder diameter 1000 * 1200mm, 1 head and 1 barrel, with self leveling and automatic barrel changing
Two needles: GC14 cylinder diameter 700 * 1200mm, two heads and two barrels, automatic barrel changing
Three needles: GC14 cylinder diameter 600 * 1200mm, 4 heads, 2 barrels, automatic barrel change
According to your requirements, we can transform it into a suitable size for your production needs! -
Waste PE PP HDPE LDPE Plastic Bags Recycling Pelletizing Machine Line Plant
Contact UsPlastic Pelletizing Line is applicable to the rapid granulation of PE, PP, LDPF, HDPE Film, Bags, Bottles and other plastic raw materials and wastes. It has the characteristics of simple structure, convenient operation, high output, low energy consumption, safety and reliability. The output of our granulator ranges from 100 kg to 1000 kg per hour. Our machines can be customized according to your requirements.
-
FS-V-F240 Injection valve
Contact UsFS-V-F240 series drip-proof valve is suitable for direct injection of lithium battery which can efficiently avoid liquid dropping and hanging.
-
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
Reviews
There are no reviews yet.