Plastic to Plastic (COMY PTP™)
Under highly selective catalytic pyrolysis of olefins and reformation, COMY converts waste plastics into new plastic monomers and new plastics(also referred to as COMY Monomers).
Under highly selective catalytic pyrolysis of olefins and reformation, COMY converts waste plastics into new plastic monomers and new plastics(also referred to as COMY Monomers).
COMY leverages its proprietary catalyst to efficiently convert mixed waste plastics into propylene. The process also generates by-products like BTX and liquefied substances, all derived from waste plastics and certified at GRS level. The PTP technology has multiple outstanding advantages.
Low-carbon and Eco-friendly
PTP dramatically cuts carbon emissions vs. petroleum-based products.
Recycling Traceability Certification
All components are sourced from waste plastics, and the production process complies with GRS certification standards.
High-Quality Products
Monomers achieve polymer-grade purity with minimal impurities.
Process
Plastic to Plastic enables the full closed-loop chain-waste plastic to pyrolysis oil to new plastic-within a single facility. All products come entirely from waste plastic, with no fuel oil produced, achieving true "oil-free purification." This means every ton of waste plastic is maximally converted into high-value resins (e.g., polypropylene) instead of being diverted to fuel, with higher recycling efficiency than traditional methods.
Related products
-
Hazardous waste incineration device project
Contact UsThis project plans to build a treatment of 50,000 tons of organic substance solvents comprehensive recycling and utilization project hazardous waste incineration device, to incinerate the hazardous waste generated by the our factory and for receiving waste from other companies.
-
KSDC-8604A/A1 Centralized Dust Collector
Contact UsFeatures:
● Compact and reasonable structure design
● Convenient dust removal, fully automatic dust removal, to ensure the continuity and efficiency of production
● Dust collection, container loading and unloading is convenient, the connection with the filter funnel is sealed, no dust leakage
● Intelligent control, optional automatic inverter, remote linkage function
● PLC control system control, humanized design of operation panel, easy to use
● The imported high-quality polyester filter material is used, and the surface of the filter material is covered with a high-precision PTFE membrane, which has higher filtration accuracy and higher filtration efficiency -
Waste liquid and waste gas incineration device
Contact UsThe furnace volume of the combined incinerator is based on the exhaust gas generated by incineration, the comprehensive residence time is ≥4s, the high-temperature (1100℃) incineration treatment is ≥1100℃, and the high-temperature section residence time is ≥2.5s to ensure the removal efficiency of organic matter.
-
Gel sealed Mini-pleat HEPA filter（Peripheral gel seals）
Contact UsThe two-component gel is poured into the liquid seal type HEPA filter , and this is used as an installation seal.
Reviews
There are no reviews yet.