Rotary Kiln Incinerator
The hazardous waste rotary kiln incineration system is a high-temperature thermal treatment solution designed for the safe and efficient disposal of a wide range of hazardous and solid wastes.
Characteristic:
1. It can simultaneously incinerate solid waste, liquids, colloids, and
gases, and has strong applicability to incineration materials;
2. Burning materials are agitated and advanced, with three heat transfer
methods coexisting in one furnace, resulting in a high heat utilization
rate;
3. The transmission mechanism is simple, the transmission mechanism is
located on the kiln shell, and the equipment maintenance is simple;
4. The residence time of up to 1 hour and high temperature above 850 ℃ in the
rotary kiln basically burn out hazardous waste;
5. The strong gas mixing in the secondary chamber causes incomplete
combustion of the unburned substances in the flue gas, reaching the high
temperature (1100 ℃) required for the decomposition of harmful components. The
residence time of the flue gas in the high temperature zone is greater than 2
seconds. Avoiding the working conditions where dioxins are produced from the
source;
6. Good sealing measures and furnace negative pressure ensure that harmful
gases do not leak out;
7. The equipment has a high operating rate, with an annual operating rate
generally reaching 90%; Easy to operate and maintain。
Scope of application: Centralized disposal of hazardous waste, chemical
sludge, oil sludge, chemical kettle residue, waste liquid, etc
Related products
-
Water-cooled cabinet
Contact UsThe water-cooled cabinet condenser uses a water-cooled condenser, and the evaporator directly cools the air.
-
FS-V-F240 Injection valve
Contact UsFS-V-F240 series drip-proof valve is suitable for direct injection of lithium battery which can efficiently avoid liquid dropping and hanging.
-
Waste PE PP HDPE LDPE Plastic Bags Recycling Pelletizing Machine Line Plant
Contact UsPlastic Pelletizing Line is applicable to the rapid granulation of PE, PP, LDPF, HDPE Film, Bags, Bottles and other plastic raw materials and wastes. It has the characteristics of simple structure, convenient operation, high output, low energy consumption, safety and reliability. The output of our granulator ranges from 100 kg to 1000 kg per hour. Our machines can be customized according to your requirements.
-
Waste plastic or Modified PE Pelletizing
Contact UsThe waste plastic or modified PE material is fed into the machine through a hopper. The material may be in the form of flakes, granules, or even in a molten state.
Reviews
There are no reviews yet.