In-line Pressure Balanced Bellows Expansion Joint
It consists of two working bellows at both ends and a balance bellows in the middle, as well as structural parts such as tie rods and end plates
In-line Pressure Balanced Bellows Expansion Joint
It consists of two working bellows at both ends and a balance bellows in the
middle, as well as structural parts such as tie rods and end plates, which are
mainly used to absorb axial displacement and can balance the pressure and thrust
of the bellows expansion joint;
Specification: DN50-DN5000;
Working pressure: 0.25-1.6Mpa.
Related products
-
FSH-FMI2020-B Standard Single/Double Channel Fluid Injection
Contact UsFSH – FMI2020 – B standard series of high-precision fluid dispensing / refilling system consists of a digital control box, stepper motor and one to two high precision rotary ceramic pump modules driven by step motor.
-
MA-(2~8MM)×1800MM Steel Coil Slitting Line
Contact UsMA-(2~8MM)×1800MM Steel Coil Slitting Line is mainly composed by the following components : uncoiler, guiding device
-
Small Scale PE PP HDPE LDPE Films Bags Rigid Plastic Granulators Recycling Pelletizing Machine
Contact UsThis is multifunctional small plastic pelletizing line. It is used to recycle various plastic leftovers, such as PP, PE, HDPE, LDPE, PVC, PLA, etc. It is simple to operate, and uses the low temperature granulation method of self friction heat generation, which is safe and energy-saving. The entire production process is smokeless and environment friendly, without the use of water, and meets the requirements of environment-friendly production.
-
VMC 700 CNC Vertical Milling Center
Contact UsThe three axes are designed with direct drive,high inertia motor with large lead screw, three axes acceleration up to 1G, from standstill to 48m/min, just 0.2 seconds.Standard 21 servo tool changer.
Reviews
There are no reviews yet.