GRC Series-Lightweight and Long Lifespan GRC5

The standard specifications cannot be applied for the use of inverted cranes. If you have any requirements, please contact us by phone or leave a message online.

GRC Series-Lightweight and Long Lifespan GRC5

Body width：54mm

Repeatability：±0.01mm

Horizontal Load：30kg

Vertical Load：10kg

Maximum Speed：1000mm/s

Travel Range：50-800mm

Set the motor acceleration and deceleration to0.2seconds.

The standard specifications cannot be applied for the use of inverted cranes. If you have any requirements, please contact us by phone or leave a message online.

Delivery time: 7-10 days

Rigid reinforcement of sliding seat
The body and slide are integrally formed, which improves the problem of poor rigidity and reduces the width, making the installation space of the equipment smaller.
Easy maintenance
Both sides of the entire series have external oil injection nozzles that can be directly filled with oil without the need for a cover. Special steel belt tie design can reduce hair and can be used in cleanroom environments.
Assembly, time-saving, and convenient
It can be fixed from top to bottom or from bottom to top without dismantling the steel strip.
Add installation reference surface support on the side of the body.There is a positioning PIN hole at the bottom of the body.
The strength increases and the smoothness improves
Due to the use of aluminum body structure, the strength of the body is significantly increased. Compared with RMH5S/6S, the steel track is embedded in the aluminum body and then ground, thus improving the accuracy of the walking height and straightness to below ± 0.02MM (compared with RMH10/12)

Reviews

There are no reviews yet.

Be the first to review “GRC Series-Lightweight and Long Lifespan GRC5”

Your email address will not be published. Required fields are marked *

Category:

Related products

  • LFQ1300 Micro Computer Controlling Slitting Machine

    LFQ1300 Micro Computer Controlling Slitting Machine

    Contact Us

  • Optimizing Cross Cut Saw MAXCUT F18S+SENSIT 005

    High speed optimization Timber cutting optimizing Cross-cut saw and precision cutting
    Automation production line.

    Contact Us

  • Oxygen Rich Side Blown Melt Melting Furnace

    The oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.

    Contact Us

  • MA-(2~8MM)×1800MM Steel Coil Slitting Line

    MA-(2~8MM)×1800MM Steel Coil Slitting Line is mainly composed by the following components : uncoiler, guiding device

    Contact Us