Wire Harness Braiding Machine(GB-24A1DT)
This type of braiding machine primarily handles the braiding of various split wire harnesses. The entire series adopts a CNC pitch system, enabling one-key setting for variable diameter and variable weft density. Combined with an ergonomic design, its running precision and ease of use are superior to imported equipment. A full range of models is available, covering 16 to 56 carriers for your selection.
GuanBo wiring harness braiding machine is designed for theproduction of cable
harnesses for automotive and aviationapplications. the machine is equipped with
automatic braidingpitch set up system which realizes that braiding diameter
andbraiding pitch can be easily and precisely set up on the controlpanel.With
our special ergonomic design, this model is easier tooperate than the imported
machines. The standard spindlenumber of this model is 16-56, special spindle
number can becustomized.
Guanbo's series of wire harness braiding machines are high-end, intelligent
equipment designed specifically for processing complex bifurcated wire
harnesses. With their exceptional flexibility, precise braiding control, and
user-friendly operation, these machines are widely used for shield braiding in
automotive wiring harnesses, military cables, and precision electronic
cables.
|
Model |
GB-24/32/48A1DT |
|
Speed of the Horngear |
400rpm |
|
Motor Power |
0.55kw/0.75kw/1.1kw |
|
Braiding Diameter |
≤6mm/≤10mm/≤15mm |
|
Braiding Pitch |
5-30PPI |
|
Braiding Material |
Chemical fiber |
|
Bobbin Volume |
A3:Φ47*140mm/210cc |
Related products
-
Waste plastic or Modified PE Pelletizing
Contact UsThe waste plastic or modified PE material is fed into the machine through a hopper. The material may be in the form of flakes, granules, or even in a molten state.
-
MA-(2~8MM)×1800MM Steel Coil Slitting Line
Contact UsMA-(2~8MM)×1800MM Steel Coil Slitting Line is mainly composed by the following components : uncoiler, guiding device
-
3MG132G CNC automatic track grinder for ball bearing inner ring
Contact UsType: high precision bearing grinder
Abrasives: diamond wheel
Controlling Mode: CNC
Processing Mode: fully automatic
Precision: high precision
Certification: GS, CE, ISO 9001
Customisation: upon request
Place of Origin: Wuxi, China
Machining Accuracy Grade: P4/P5
External Dimensions: 2070mm*1320mm*1880mm
MOQ: 1 set
DM: 3 months
Packaging: three-ply board -
Oxygen Rich Side Blown Melt Melting Furnace
Contact UsThe oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
Reviews
There are no reviews yet.